E102 controller
For complex working conditions Powerful functions
| Specification | Parameter |
|---|---|
| 工作电压/Operation voltage | 10~36V DC |
| 工作温度/Operation temperature | -40℃~+75℃ |
| 存储温度/Storage temperature | -40℃~+85℃ |
| 电流消耗/Current consumption | No load, in 12V vehicle electrical system :200m No load, in 24V vehicle electrical system :100mA |
| 最大负载电流/Maximum load current | 15A |
| 处理器单元/Processor unit | 32Bit 180MHz |
| 参数空间/Parameter space | 32KB FRAM |
| 防护等级/Degree of protection | IP66/67 |
| 外形尺寸/Form factor | 158.6mm x 111mm x40.4mm |
| 通信接口/Communication interface | CAN2.0B |
| 编程方式/Programmatic | Codesys、simulink |
| Specification | Parameter |
|---|---|
| 工作电压/Operation voltage | 10~36V DC |
| 工作温度/Operation temperature | -40℃~+75℃ |
| 存储温度/Storage temperature | -40℃~+85℃ |
| 电流消耗/Current consumption | No load, in 12V vehicle electrical system :200m No load, in 24V vehicle electrical system :100mA |
| 最大负载电流/Maximum load current | 15A |
| 处理器单元/Processor unit | 32Bit 180MHz |
| 参数空间/Parameter space | 32KB FRAM |
| 防护等级/Degree of protection | IP66/67 |
| 外形尺寸/Form factor | 158.6mm x 111mm x40.4mm |
| 通信接口/Communication interface | CAN2.0B |
| 编程方式/Programmatic | Codesys、simulink |
输入端口 | 端口数量 | 端口描述 |
| DIH/DIL | 4 | 默认为高有效开关量输入；可复用为低有效开关量输入。 The default is a high effective switching input；Can be reused as a low effective switching input. |
| DIH | 4 | 高有效开关量输入。High effective switching quantity input. |
| PI/DIH | 4 | 默认为频率输入；可复用为高有效开关量输入。 The default is frequency input，can be reused as high effective switching quantity input. |
| RI/DIL | 4 | 默认为0~15KΩ电阻型模拟量输入； 可复用为低有效开关量输入； The default value is 0~15KΩ resistor analog input. Can be reused as a low effective switching input. |
| AI/DIH | 8 | 默认为0~5V电压型模拟量输入； 可复用为4~20mA电流型模拟量输入；可复用为高有效开关量输入；The default is 0~5V voltage type analog input.Can be reused for 4~20mA current type analog input.Can be reused as high effective switching quantity input |
输出端口 | 端口数量 | 端口描述 |
| PWM(CC)/DOH | 8 | 默认为PWM输出，带电流反馈； 可复用为2A高边输出；Default PWM output, with current feedback；Can be reused as 2A high side output. |
| PWM/DOH | 4 | 默认为2A高边输出；可复用为PWM输出。Default is 2A high-edge output; Can be reused as PWM output |
| DOH | 10 | 默认为2A高边输出。Default is 2A high-edge output. |
| AO | 2 | 0-5V voltage output |
| +5VOUT | 1 | 5Vpower output |
秉承“高效、完善”的理念，履行给每一个客户的承诺。
Adhering to the concept of "high efficiency and perfection", we fulfill the promise to every customer.
微信联系
