IO-C-2012N Controller
Simple, versatile, compact and reliable
IO-C-2012N IO模块是徐州威卡电子控制技术有限公司开发的系列化简单易用的通用型IO模块。产品设计紧凑且安装方便，适用于在控制柜或作业现场快速安装。这样既可以减少控制器的使用数量，也可以减少系统布线的复杂度、降低布线成本，满足客户需求。
IO-C-2012N IO module is a series of simple and easy-to-use general-purpose IO modules developed by Xuzhou Mook Electro-Hydraulic Control Co.,Ltd. The product is compact and easy to install, suitable for quick installation in the control cabinet or on the job site. This not only reduces the number of controllers used, but also reduces the complexity of system wiring, lowers wiring costs, and meets customer needs.
技术参数/Technical Data | |
工作电压/Operating Voltage | 8~36V DC |
工作温度/Operating Temperature | -40℃~+75℃ |
存储温度/Storage Temperature | -40℃~+85℃ |
相对湿度/Relative Humidity | 45%~90% |
电流消耗/Current consumption | 无负载，在12V车辆电气系统中：200mA 无负载，在24V车辆电气系统中：100mA No load, in 12V vehicle electrical system: 200mA No load, in 24V vehicle electrical system: 100mA |
最大负载电流/Maximum Load Current | 30A |
处理器单元/Processor Unit | 16Bit 80MHz |
存储/Storage | 82KB SDRAM，768KB FLASH |
参数空间/Parameter space | 2KB FRAM |
防护等级/Protection class | IP66/67 |
外形尺寸/Dimension | 158.6mm × 111mm × 40.4mm |
通信接口/Communication Interface | CAN2.0B |
- 2 x CAN2.0B, 50 Kbit/s ~ 1 Mbit/s;
- 10 x VI, 0 to 5 V analogue signal input, 10 bits, multiplexable as current type analogue signal input and high effective switching input;
- 2 x PI, 1 Hz to 15 kHz, multiplexable as high effective switching inputs, software configurable;
- 10 x DO, 2A high-side output, multiplexable as a high-effective switching input;
- 6 x DO, 4A high-side outputs, multiplexable as high effective switching inputs;
- 4 × PWM, 2A output, 10-bit current feedback, constant current control, multiplexable as a high effective switching input;
- 1 × VERF 5V/100mA.
技术参数/Technical Data | |
工作电压/Operating Voltage | 8~36V DC |
工作温度/Operating Temperature | -40℃~+75℃ |
存储温度/Storage Temperature | -40℃~+85℃ |
相对湿度/Relative Humidity | 45%~90% |
电流消耗/Current consumption | 无负载，在12V车辆电气系统中：200mA 无负载，在24V车辆电气系统中：100mA No load, in 12V vehicle electrical system: 200mA No load, in 24V vehicle electrical system: 100mA |
最大负载电流/Maximum Load Current | 30A |
处理器单元/Processor Unit | 16Bit 80MHz |
存储/Storage | 82KB SDRAM，768KB FLASH |
参数空间/Parameter space | 2KB FRAM |
防护等级/Protection class | IP66/67 |
外形尺寸/Dimension | 158.6mm × 111mm × 40.4mm |
通信接口/Communication Interface | CAN2.0B |
输入端口/Input port | 端口数量/No. of ports | 端口描述/Port description |
PI/DIH | 2 | 默认为频率输入； 可复用为高有效开关量输入 Can be multiplexed as a highly effective switching input |
CI/VI/RI/DIH | 4 | 默认为4~20mA电流型模拟量信号输入； 可复用为0~5V电压型模拟量输入； 可复用0~20KΩ电阻型模拟量输入； 可复用为高有效开关量输入； 作为CI/VI时，可诊断对地短路 Multiplexable to 0~5V voltage type analog input; Multiplexable to 0~20KΩ resistance type analog input; Can be multiplexed as highly effective switching input; When used as CI/VI, it can diagnose short circuit to ground. |
VI/CI/DIH | 6 | 默认为0~5V电压型模拟量输入； 可复用为4~20mA电流型模拟量输入； 可复用为高有效开关量输入； 可诊断对电源、对地短路 Multiplexable to 4~20mA current type analog input; Can be multiplexed to high effective switch input; Diagnose short circuit to power supply and ground |
输出端口/Output Port | 端口数量/No. of ports | 端口描述/Port description |
PWM/DIH/DOH | 4 | 默认为2A PWM输出； 可复用为高有效开关量输入； 可复用为2A高边输出； 作为PWM/DOH时，可诊断对电源短路、对地短路（对地电阻<6Ω）、负载超限、断线（电流<10mA） May be multiplexed to a highly active switching input; Multiplexable to 2A high-side output; When used as PWM/DOH, it can diagnose short circuit to power, short circuit to ground (resistance to ground<6Ω), load overrun, disconnection (current <10mA) |
DOH(2A)/DIH | 10 | 默认为2A高边输出； 可复用为高有效开关量输入； 作为DOH时，可诊断断线和对地短路 Can be multiplexed as a highly valid switching input; Diagnostic for broken wires and short to ground when used as DOH |
DOH(4A)/DIH | 6 | 默认为4A高边输出； 可复用为高有效开关量输入； 作为DOH时，可诊断对地短路 Can be multiplexed as a highly valid switching input; Diagnostic for short to ground when used as DOH |
秉承“高效、完善”的理念，履行给每一个客户的承诺。
Adhering to the concept of "high efficiency and perfection", we fulfill the promise to every customer.
微信联系