LWG720系列长度角度传感器由长度检测单元和角度检测单元组成，可以实现长度和角度的测量，同时长角传感器内置多路滑环，通过高强度的测长电缆，实现信号传输。

该长度角度传感器适用于伸缩机构的长度测量和变幅机构的角度测量，如伸缩臂式起重机、伸缩式随车起重机、伸缩式高空作业车、高空消防车以及其它具有伸缩变幅机构的工程机械。

LWG720 series length angle sensor consists of length detection unit and angle detection unit, which can realize length and angle measurement, meanwhile, the length angle sensor has a built-in multi-way slip ring, and through the high-strength length measuring cable, signal transmission is realized.

The length and angle sensor is suitable for length measurement of telescopic mechanism and angle measurement of luffing mechanism, such as telescopic boom crane, telescopic truck-mounted crane, telescopic aerial work truck, aerial fire truck and other construction machinery with telescopic luffing mechanism.

测量范围最长 15m，非接触式霍尔测长机构

长度分辨率最高0.1mm，倾角分辨率最高0.01°

支持冗余扩展，故障诊断

镀金合金滑环，支持端口过压保护和极性反接

CE认证

工作温度范围区间内误差补偿

Measuring range up to 15m, non-contact Hall length measurement mechanism

Length resolution up to 0.1mm, inclination resolution up to 0.01°.

Supports redundancy expansion and fault diagnosis

Gold-plated alloy slip ring, support port over-voltage protection and reverse polarity

CE certified

Error compensation over the operating temperature range