销轴力传感器是一个中空的圆柱体，由防锈、耐腐蚀优质不锈钢制成，它由中间部分即压力承载区、传感器支撑区和两个测量槽构成。测量装置为由应变片组成的惠斯通电桥，安装在销轴力传感器内，以防外部不良影响（如：机械损伤、灰尘、潮湿等）

销轴力传感器的中间部分力的输入形式为剪切载荷，作用在传感器左、右两部分的支撑力使传感器发生变化，由剪切应力引起的变形转换成与负载成正比的电信号。因为考虑到测量形式，所以销轴力传感器有一个最佳测量方向。在这个最佳方向上，输出信号可达到最大值。此时，传感器中间部分上的压力方向与主要测量方向一致，测量方向由箭头在传感器上表示出来

Pin shaft force sensor is a hollow cylinder made of rust resistant and corrosion resistant stainless steel, which consists of the middle part of the pressure bearing area, sensor support area and two measuring grooves. The measuring device is a whiss power bridge composed of strain gauge, installed in the pin shaft force sensor to prevent external adverse effects (such as mechanical damage, dust, moisture, etc.). 

The input form of the force in the middle part of the pin shaft force sensor is the shear load. The supporting force acting on the left and right parts of the sensor changes the sensor, and the deformation caused by the shear stress is converted into an electrical signal proportional to the load. Considering the measurement form, the pin axial force sensor has an optimal measurement direction. In this optimal direction, the output signal can reach a maximum value. At this point, the pressure direction on the middle part of the sensor is consistent with the main measurement direction, and the measurement direction is indicated by the arrow on the sensor

标准化产品或客户定制化产品

安装简单方便

极高的过载保护能力和抗疲劳极限

高精确度和线性度

具备温度补偿

测力范围从0.5吨到千吨级

高防护等级：IP66、IP67

使用寿命长、无须保养

Standardized products or customer-customized products

The installation is simple and convenient

Very high overload protection capacity and fatigue resistance limit

High precision and the linearity

Have temperature compensation

Force range from 0.5 tons to thousand tons

High protection level: IP66, IP67

Long service life, no maintenance